Commands Listed in Alphabetical Order
SYSTem:PROPe
rties:CH<x>:EXTender? (Query Only)
This query only command returns the extender cable type that is attached to the
channel specified by x, which c an be 1 through 8. The extender attaches between
the sampling
module and the mainframe.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:E XTender?
Examples
SYSTEM:PROPERTIES:CH8:EXT ENDER? might return
SYSTEM:PROPERTIES:CH8:EXT ENDER ONEMETER, indicating that a 1-meter
extender cable is present on Channel 8.
SYSTem:PROPerties:CH<x>:FILTer? (Query Only)
This query only command returns a list of the available filter selections for the
channel specified by x, which can be 1 through 8.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:F ILTer?
Related Commands
CH<x>:FILTer:LIST?, CH<x>:FILTer:VALue
Examples
SYSTEM:PROPERTIES:CH1:FIL TER? might return
SYSTEM:PROPERTIES:CH1:FIL TER NONE,OC12,OC48,OC192.
SYST
em:PROPerties:CH<x>:IMPedance? (Query Only)
This query only command returns the characteristic input impedance of the
sampling module (if applicable) for the channel specified by x, which can be
1th
rough 8.
Gr
oup
System
Sy
ntax
SYSTem:PROPerties:CH<x>:I MPedance?
2-284 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
