Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
Examples
SYSTEM:PROPER
TIES:CH4:SERIALNUM?
might return
SYSTEM:PROPERTIES:CH4:SER IALNUM "B013456" as the serial
number of the module occupying channel 4.
SYSTem:PROPerties:CH<x>:TEKPDriver? (Query Only)
This query only command returns the TEKPROBE driver revision number for
the channel specified by x, which can be 1 through 8.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:T EKPDriver?
Examples
SYSTEM:PROPERTIES:CH4:TEK PDRIVER? might return
SYSTEM:PROPERTIES:CH4:TEK PDRIVER "1.00", indicating the
TEKPROBE driver revision number for Channel 4.
SYSTem:PROPerties:CH<x>:TEKPVersion? (Query Only)
This query only command returns the TEKPROBE version number for the
channel specified by x, which can be 1 through 8.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:T EKPVersion?
Examples
SYSTEM:PROPERTIES:CH4:TEK PVERSION? might return
SYSTEM:PROPERTIES:CH4:TEK PVERSION "3.00", indicating the
TEKPROBE version number for Channel 4.
SYSTem:PROPerties:CH<x>:WLENgth? (Query Only)
This query only command returns a list of the available factory and user
wavelength selections for the channel specified by x, which can be 1 through 8.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:W LENgth?
2-290 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English