Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
SYSTem:PROPe
rties:ONTime? (Query Only)
This query only command returns the on time (in hours) for the current power-on
cycle of the instrument.
Group
System
Syntax
SYSTem:PROPerties:ONTime?
Examples
SYSTEM:PROPERTIES:ONTIME? might return SYSTEM:PROPERTIES:ONTIME
1.50
, indicating the on time for the instrument for the current power-on cycle
is 1.5 hours.
SYSTem:PROPerties:POWerups? (Query Only)
This query only command returns the total number of times that the instrument
has been powered on.
Group
System
Syntax
SYSTem:PROPerties:POWerups ?
Examples
SYSTEM:PROPERTIES:POWERUPS ? might return
SYSTEM:PROPERTIES:POWERUPS 8, indicating that the instrument has been
powered on a total of eight times.
SYSTem:PROPerties:PROCHWver? (Query Only)
This query only command returns the hardware version of the Processor circuit
board in the instrument.
Group
System
Syntax
SYSTem:PROPerties:PROCHWve r?
Examples
SYSTEM:PROPERTIES:PROCHWVE R? might return
SYSTEM:PROPERTIES:PROCHWVE R 1.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-293

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English