Tektronix DSA8200 Series

Commands Listed in Alphabetical Order
SYSTem:PROPe
rties:TOTalontime? (Query Only)
This query only command returns the total accumulated power-on time (in hours)
across all power cycles.
Group
System
Syntax
SYSTem:PROPerties:TOTalon time?
Examples
SYSTEM:PROPERTIES:TOTALON TIME? might return
SYSTEM:PROPERTIES:TOTALON TIME 533.47, indicating the total power-on
time for the instrument is 533.47 hours.
SYSTem:PROPerties:TRIGProbe:PSYNc:CLKRAnge? (Query Only)
This query only command returns the guaranteed clock range of the PatternSync
Trigger module connected to the TRIGGER PROBE POWER connector.
Group
System
Syntax
SYSTem:PROPerties:TRIGPro be:PSYNc:CLKRAnge?
Examples
SYSTEM:PROPERTIES:TRIGPRO BE:PSYNC:CLKRANGE? might
return
SYSTEM:PROPERTIES:TRIGPROBE: PSYNC:CLKRANGE
"150.OMHZ-12.75GHZ"
for a PatternSync Trigger module connected to the
TRIGGER PROBE POWER connector.
SYSTem:PROPerties:TRIGProbe:PSYNc:PLENRAnge? (Query Only)
This query only command returns the guaranteed pattern length range of the
PatternSync Trigger module connected to the TRIGGER PROBE POWER
connector.
Group
System
Syntax
SYSTem:PROPerties:TRIGPro be:PSYNc:PLENRAnge?
Examples
SYSTEM:PROPERTIES:TRIGPRO BE:PSYNC:PLENRANGE? might
return
SYSTEM:PROPERTIES:TRIGPROBE :PSYNC:PLENRANGE
2-294 DSA/CSA/TDS8X00/B Series Programmer Manual