Commands Listed in Alphabetical Order
FC11317 | FC140
25 | FEC2666 | FEC10664 | FEC10709 | FEC12500
| FEC43 018 | FPELEC OUT | INF2500 | INF5000 | INF14063 |
INF25781 | INFIniband | OBSAI6144 | OC1 | OC3 | OC9 | OC12 |
OC18 | OC24 | OC
36 | OC48 | OC96 | OC192 | OC768 | OTU27952
| SFEC1 2500 }
CH<x>:FILTer
:VALue?
Related Commands
CH<x>:FILTer:LIST?
Arguments
NONe disables reference-receiver filtering.
CPRI7373 selects a reference-receiver filter for the 7.373 Gb/s bit rate, in
accordance with the Wireless Base Station CPRI 7.373 standard.
ENET103R4 selects a reference-receiver filter for the 10.3125 Gb/s bit rate, in
accordance with the Ethernet 4 0GBASE-LR4/SR4 standard.
ENET103R10 selects a reference-receiver filter for the 10.3125 Gb/s bit rate, in
accordance with the Ethernet 100GBASE-SR10 standard.
ENET257R4 selects a reference-receiver filter for the 25.78125 Gb/s bit rate, in
accordance with the Ethernet 100GBASE-ER4/LR4 standard.
ENET1250 selects a reference-receiver filter for the 1.250 Gb/s bit rate, in
accordance with the IEEE 802.3ae-2002 standard.
ENET2500 selects a reference-receiver filter for the 2.500 Gb/s bit rate (2x
Gigabit Ethernet).
ENET3125 selects a reference-receiver filter for the 3.125 Gb/s bit rate, in
accordance with the IEEE 802.3ae-2002 standard.
ENET9953 selects a reference-receiver filter for the 9.95328 Gb/s bit rate, in
accordance with the IEEE 802.3ae-2002 standard.
ENET10313 selects a reference-receiver filter for the 10.3125 Gb/s bit rate, in
accordance with the IEEE 802.3ae-2002 standard.
ENET11096 selects a reference-receiver filter for the 11.095728 Gb/s bit rate,
which is a forward error-correction rate for 10GbE (10.3125 Gb/s per IEEE
802.3ae-2002 standard).
ENET41250 selects a reference-receiver filter for the 41.250 Gb/s b it rate, in
accordance with the Ethernet 40GBASE-FR standard.
FC1063 selects a reference-receiver filter for the 1.0625 Gb/s bit rate, in
accordance with the ANSI X3.230-1994 standard.
FC2125 selects a reference-receiver filter for the 2.125 Gb/s bit rate, in accordance
with the ANSI Fibre Channel Physical Interface (FC-PI) Rev 11 draft standard.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-83
To Next Page
Loading...
Need help?
General
