Commands Listed in Alphabetical Order
(See page 2-95, Wa
veform Transfer Command Group.)
(See page D-1, Waveform Transfer (WFMOutpre and CURVe Query) Examples.)
Group
Waveform Transfer
Syntax
WFMOutpre:YZEro?
Related Commands
DATa:SOUrce,
WFMOutpre:YUNit?
Examples
WFMOUTPRE:YZERO? might return :WFMOUTPRE:YZERO -100.0000E-3
indicating th
at vertical offset is set to -100 mV.
ZOOm? (Query Only)
Returns the current vertical and horizontal positioning and scaling of thedisplay.
Group
Zoom
Syntax
ZOOm?
Examples
ZOOM? might return :ZOOM:MODE 1;GRATICULE:SIZE
80;SPLIT EIGHTYTWENTY;:ZOOM:ZOOM1:STATE
1;SCALE 400. 0000E-12 ;POSITION 46.8986;FACTOR
50.0000E+3;HORIZONTAL:POSITION 46.8986;SCALE 40 0.0000E-12
ZOOm{:MODe|:STATE}
Turns Zoom mode on or off. The Zoom query returns the current state of Zoom
mode. This command is equivalent to pressing the zoom button located on the
front panel.
Group
Zoom
Syntax
ZOOm{:MODe|:STA
TE} {ON |OFF|<NR1>}
ZOOm{:MODe|:STATE}
2-974 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
