Tektronix MDO3000 Series Program Manual

Command Groups
Table 2-23: DVM Commands (cont.)
Command
Description
DVM:MEASUrement:HIStory:
MINImum?
Returns the minimum readout value for the DVM function over the history period.
DVM:MEASUrement:INFMAXimum?
Returns the maximum DVM readout value over the entire time that the DVM has been on
since the last change using the DVM:MODe or DVM:SOUrce commands or
DVM RESET.
DVM:MEASUrement:INFMINimum? Returns the minimum readout value of the DVM function over the entire time that the DVM
has been on since the last change using the DVM:MODe or DVM:SOUrce commands or
DVM RESET.
DVM:MEASUrement:VALue? Returns the DVM readout value (the l arge displayed value at the top of the DVM screen).
DVM:MODe Specifies (or queries) the mode to use for the Digital Voltmeter (ACRMS, ACDCRMS, DC,
Frequency, or OFF).
DVM:SOUrce Sets (or queries) the source for the Digital Voltmeter: Channel 1 - 4.
Email Command Group
Use the email commands for both email printer support and Act on Event “send
an email” actions.
Different email systems require different information. See your system
administrator to determine which commands are necessary for your email system.
Table 2-24: EmailCommands
Command
Description
EMAIL:SETUp:FROMADDRess Sets (or queries) the sender’s email address for the common server setup information that is
shared between the Act on Event commands and the Hardcopy Email commands.
EMAIL:SETUp:HOSTALIASNAMe Sets (or queries) the email host alias name for the common server setup information that is
shared between the Act on Event commands and the Hardcopy Email commands.
EMAIL:SETUp:SMTPLOGIn Sets o r returns the email SMTP server login ID for the common server setup information that
is shared between the Act on Event commands and the Hardcopy Email commands.
EMAIL:SETUp:SMTPPASSWord Sets the email SMTP server login password for the common server setup information that is
shared between the Act on Event commands and the Hardcopy Email commands.
EMAIL:SETUp:SMTPPort Sets or returns the email SMTP server port number for the common server setup information
that is shared between the Act on Event commands and the H ardcopy Email commands
EMAIL:SETUp:SMTPServer Sets or returns the email SMTP server DNS name for the common server setup information
that is shared between the Act on Event commands and the Hardcopy Email commands.
Ethernet Command Group
Use the commands in the Ethernet Command Group to set up the 10BASE-T or
100BASE-TX Ethernet remote interface.
2-26 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English