Tektronix MDO3000 Series Program Manual

Appendix H: List of Beta Commands and Features
Tektronixtoco
mply with any additional obligations with respect to any Tektronix
products or services that incorporate any feedback.
Command List
TableH-1:PresentlyAvailableBetaCommands
Feature
Associated Commands
AFG run commands AFG:RUNMode
AFG trigger
commands
AFG:TRIGger
AFG:TRIGger:MODe
AFG:TRIGger:SOUrce
AFG:TRIGger:POLarity
AFG:TRIGger:COUnt
AFG:TRIGger:INTerval
AFG:TRIGger:DELay
AFG modulation
commands
AFG:MODULation:TYPeAFG:MODULation:TYPe
AFG:MODULation:AM:WAVeform
AFG:MODULation:AM:FREQuency
AFG:MODULation:AM:DEPth
AFG:MODULation:FM:WAVeform
AFG:MODULation:FM:FREQuency
AFG:MODULation:FM:DEViation
Beta Commands Listed in A lphabetical Order
AFG:MODULation:AM:DEPth
Description:
Sets the modulation depth to use for Amplitude Modulation for the AFG.
Con
ditions:
Beta Command, see conditions of use. Default setting is 50.0.
Group:
AFG
Syntax:
AFG:MODULation:AM:DEPth <NR3>
AFG:MODULation:AM:DEPth?
Arguments:
<NR3> - Depth value in percent from 0.0 to 100.0 with a resolution of 0.1%.
H-2 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English