Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
BUS:B<x>:CAN
:FD:BITRate
Specifies the FD bit rate for the CAN bus. This is the bitrate used for CAN FD
frames transmitted with increased data phase rates. The maximum bitrate for
MDO3000 mode
ls is 7 Mbps. The maximum bitrate for MDO4000C models
is 10 Mbps.
Conditions
This feat
ure requires installation of a DPO4AUTO or DPO4AUTOMAX
application module for MDO4000C models, or MDO3AUTO for MDO3000
models.
Group
Bus
Syntax
BUS:B<x>:CAN:FD:BITRate <NR1>
BUS:B<x>:CAN:FD:BITRate?
Arguments
<NR1> is the FD bit rate. The instrument supports bit rates at 100 bps intervals.
You can enter any positive integer, and the instrument will coerce the valueto
the closest supported bit rate.
Returns
The query always returns the numerical FD bit rate value.
Examples
BUS:B1:CAN:FD:BITRate 2000000 sets the FD bit rate to 2000000.
BUS:B1:CAN:FD:BITRate? might return 4000000, indicating that the FD bit
rate is 4 Mbps.
BUS:B<x>:CAN:FD:STANDard
Specifies the CAN FD standard to use.
Conditions
This feature requires installation of a DPO4AUTO or DPO4AUTOMAX
application module for MDO4000C models, or MDO3AUTO for MDO3000
models.
Group
Bus
Syntax
BUS:B<x>:CAN:FD:STANDard
BUS:B<x>:CAN:FD:STANDard{ISO | NONISO} string
BUS:B<x>:CAN:FD:STANDard?
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-169

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English