Commands Listed in Alphabetical Order
CONFIGuratio
n:APPLications:POWer? (Query Only)
This query returns a boolean value to indicate whether the optional power
application feature is present.
Conditions
This feature requires installation of a DPO4PWR application module, or
MDO3PWR for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:APPLications:POWer?
Related Commands
(See page 2-41, Power Command Group.)
Returns
1 indicates the power application feature is present.
0 indicates the power application feature is not present.
CONFIGuration:APPLications:STANDARDMask? (Query Only)
Indicates whether the Standard Mask test feature is present and enabled.
Conditions
Available for DPO/MSO4000B and MDO4000/B/C series models only when the
DPO4LMT option is present. Not avail
able for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:APPLications:STANDARDMas k?
Returns
1 indicates that the Standard Mask test feature is present and enabled.
0 indicates that either the Standard Mask test feature is not present, or it isnot
enabled.
Examples
CONFIG:APPL:STANDARDM? might return 1, indicating that the hardware is
present and the feature is enabled.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-241
To Next Page
Loading...
Need help?
General
