Commands Listed in Alphabetical Order
Group
File System
Syntax
FILESystem:DIR?
Related Commands
FILESystem:CWD,
FILESystem:MKDir
Arguments
None
Returns
FILESystem:DIR? returns a list of files and directories in the current working
directory.
Examples
FILESYSTEM:DIR? might return
:FILESYSTEM:DIR
"tek00000.png","my_CAN_setup.set","sav edWfm1.isf","myImages"
FILESystem:FORMat (No Query Form )
Formats a mass storage device. This command should be used with extreme
caution as it causes all data on the specified mass storage device to be lost.
Drive letters (e.g., E:) are case sensitive and must be upper case. For all other
FILESYSTEM commands, drives letters are not case sensitive. Example:
FILES:FORMAT "E:/" Formats the USB flash drive installed in the oscilloscope's
front panel USB port.
Group
File System
Syntax
FILESystem:FORMat
Arguments
<drive name> is a quoted string that defines the disk drive to format.
Examples
FILESYSTEM:FORMAT "E:/" formats the USB flash drive installed in the
oscilloscope's front panel USB port.
FILESystem:FREESpace? (Query Only)
Returns the number of bytes of free space on the current drive.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-321
To Next Page
Loading...
Need help?
General
