Commands Listed in Alphabetical Order
Examples
HARDCOPY:INKS
AVER ON
will cause subsequent hard copy output to display the
screen on a white background.
HARDCopy:LAYout
This command specifies the page orientation for hard copy. If you set the layout to
LANdscape, the printer will print hard copies in landscape mode where the long
edge of the screen will print to the long edge of the sheet of paper. If you set the
layout to P
ORTRait, the printer will print hard copies in portrait mode.
This command is not applicable for PictBridge hardcopies.
Group
Hard Copy
Syntax
HARDCopy:LAYout {PORTRait|LANdscape}
HARDCopy:LAYout?
Arguments
PORTRait orients the screen image vertically on the printed page.
LANdscape orients the screen image horizontally on the printed page.
Examples
HARDCOPY:LAYOUT LANDSCAPE sets the hard copy page orientation to Landscape.
HARDCOPY:LAYOUT? might return :HA RDCOPY:LAYOUT PORTRAIT indicating
that the hard copy page orientation is set to portrait.
HARDCopy:PREVIEW (No Query Form)
Displays a preview of the current screen contents with the InkSaver palette
applied.
Group
Hard Copy
Syntax
HARDCopy:PREVIEW {ON|OFF|<NR1>}
Arguments
ON or <NR1> ≠ 0 turns preview mode on.
OFF or <NR1> = 0 turns preview mode off.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-333
To Next Page
Loading...
Need help?
General
