Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
MEASUrement:
MEAS<x>:UNIts? (Query Only)
Returns the units associated with the specified measurement. The measurement
slots are specified by <x>, which ranges from 1 through 8 (only 4 in
MDO3000 mode
ls).
Group
Measurement
Syntax
MEASUrement:MEAS<x>:UNIts?
Related Commands
MEASUrement:MEAS<x>:TYPe
Returns
This query returns one of the following strings.
Unit string Description
"%"
percent
"/Hz"
inverse hertz
"?"
indeterminate
"A"
amperes
"A/A"
amperes per ampere
"A/V"
amperes per volt
"A/W"
ampere per watt
"A/dB"
amperes per decibel
"A/s"
amperes per second
"AA" amperes squared
"AW"
ampere-watts
"AdB" ampere-decibels
"As" ampere-seconds
"B" bytes
"Hz" hertz
"IRE"
Institute of Radio Engineers units
"S/s"
samples per second
"V" volts
"V/A"
volts per ampere
"V/V"
volts per volt
"V/W"
volts per watt
"V/dB"
volts per decibel
"V/s"
volts per second
"VA" volt-amperes
2-442 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English