Commands Listed in Alphabetical Order
Arguments
DEFLT is the def
ault setting of the printer.
ON enables the date print on the print output.
OFF disables the date print on the print output.
Examples
PICTBRIDGE:DATEPRINT ON enables the date print on the print output.
PICTBRIDGE:DATEPRINT? might return PICTBRI DGE:DATEPRINT DEFLT
indicating the default setting of the printer.
PICTBridge:DEFault (No Q uery Form)
Sets the arguments for all PictBridge commands to their default values. The
default values are same as printer default settings.
Group
PictBridge
Syntax
PICTBridge:DEFault
Examples
PICTBRIDGE:DEFAULT sets all PICTBridge commands to their default values.
PICTBridge:IDPrint
Enables or disables printing the oscilloscope model and serial number on the
print output.
Group
PictBridge
Syntax
PICTBridge:IDPrint {DEFLT|OFF|ON}
PICTBridge:IDPrint?
Arguments
DEFLT is the default setting of the printer.
ON enables the oscilloscope model and serial number print on the print output.
OFF disables the oscilloscope model and serial number print on the print output.
Examples
PICTBRIDGE:IDPRINT ON enables the printing of oscilloscope model and serial
number on the print output.
2-460 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
