Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Group
Power
Syntax
POWer:QUALity:DISplay:VCRESTfactor {OFF|ON|0|1}
POWer:QUALity:DISplay:VCRESTfactor?
Arguments
OFF or 0 turns off the voltage crest factor display.
ON or 1 turns on the voltage crest factor display.
Examples
POWER:QUALITY:DISPLAY:VCRESTFACTOR 1 turns on the voltage crest factor
display.
POWER:QUALITY:DISPLAY:VCRESTFACTOR? might return
:POWER:QUALITY:DISPLAY:VCRESTFACTOR 0 indicating that the
voltage crest factor display is off.
POWer:QUALity:DISplay:VRMS
This command specifies the display state for the rms voltage readout.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:QUALity:DISplay:VRMS {OFF|ON|0|1}
POWer:QUALity:DISplay:VRMS?
Arguments
OFF or 0 turns off the rms voltage display.
ON or 1 turns on the rms voltage display.
Examples
POWER:QUALITY:DISPLAY:VRMS0 turns off the rms voltage display.
POWER:Q
UALITY:DISPLAY:VRMS?
might return
:POWER:QUALITY:DISPLAY:VRMS 1 indicating that the rms voltage display
is on.
POWer:QUALity:FREQREFerence
This command specifies the power quality frequency reference.
2-494 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English