Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Syntax
POWer:SWLoss:
TOFF:POWer:MAX?
Examples
POWER:SWLOSS:TOFF:POWER:MAX? might return
:POWER:SWLOSS:TON:POWER:MAX 1 indicating that the maximum Toff power
switching loss calculation is set to 1 W.
POWer:SWLoss:TOFF:POWer:MEAN? (Query Only)
Returns the mean Toff power for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:TOFF:POWer:MEAN?
Examples
POWER:SWLOSS:TOFF:POWER:MEAN? might return
:POWER:SWLOSS:TON:POWER:MEAN 1 indicating that the mean Toff power
switching loss calculation is set to 1 W.
POWer:SWLoss:TOFF:POWer:MIN? (Query Only)
Returns the minimum Toff power for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:TOFF:POWer:MIN?
Examples
POWER:SWLOSS:TOFF:POWER:MIN? might return
:POWER:SWLOSS:TON:PO
WER:MIN 1
indicating that the minimum Toff power
switching loss calculation is set to 1 W.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-529

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English