Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
REF<x>? (Quer
yOnly)
This query returns data for the reference waveform specified by <x>.
Group
Vertical
Syntax
REF<x>?
REF<x>:DATE? (Query Only)
Returns the date that reference waveform data for reference waveform <x> was
copied into the internal reference memory.
Group
Vertical
Syntax
REF<x>:DATE?
REF<x>:HORizontal:DELay:TIMe
This command specifies the horizontal delay time for reference waveform <x>.
Thedelaytimeisexpresse
d in seconds and is limited to ±5 times the reference
horizontal scale.
Group
Vertical
Syntax
REF<x>:HORizontal:DELay:TIMe <NR3>
REF<x>:HORizontal:DELay:TIMe?
Arguments
<NR3> is a floating point number that specifies the delay time, in seconds.
Examples
REF2:HORIZONTAL:DELAY:TIME 4.0E-6 sets the horizontal delay time for
the REF2 waveform to 4 μs.
REF<x>:HORizontal:SCAle
This command specifies the horizontal scale for the reference waveform specified
by <x>.
2-542 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English