Commands Listed in Alphabetical Order
Group
Save and Recall
Syntax
SAVe:WAVEform:GATIng {NONe|CURSors|SCREEN}
SAVe:WAVEform:GATIng?
Arguments
CURSors turns on cursors and the gates are the waveform record points at the
cursor positions.
NONe saves the entire waveform.
SCREEN, if zoom is on, the gates are the start and end waveform record points o
f
the zoom (upper) graticule, otherwise the gates are the start and end waveform
record points of the main graticule.
Examples
SAVE:WAVEFORM:GATING CURSors specifies that, when the waveform gating
is set to cursors, save waveform operations should save the waveform points
between the cursors. If cursors are turned off, waveform gating automatically
reverts to NONE.
SEARCH? (Query Only)
Returns all search-related settings.
Gr
oup
Search
Syntax
SEARCH?
Examples
SEARCH? might return:
:SEARCH:SEARCH1:TRIG:A:BUS:B1:SPI:COND SS;DAT:MOSI :VAL
"XXXXXXXX";:SEARCH:SEARCH1:TRIG:A:BUS: B1:SPI: DAT:MISO:VAL
"XXXXXXXX";:SEARCH:SEARCH1:TRIG:A:BUS: B1:SPI:DAT:SIZ
1;:SEARCH:SEARCH1:TRIG:A:BUS:B1:I2C:CO ND
STAR;DAT:VAL "XXXXXXXX";SIZ 1;DIR
NOCARE;:SEARCH:SEARCH1:TRIG:A:BUS:B1:I 2C:ADDR:MOD ADDR7;TYP
USER;VAL "XXXXXXX";:SEARCH:SEARCH1:TRIG:A:BUS:B1:C AN:COND
SOF;FRAME DATA;DAT:VAL "XXXXXXXX";SIZ 1;D I R
NOCARE;QUAL EQU;:SEARCH:SEARCH1:TRIG:A:BUS:B1:CAN: ID:MOD
ST;VAL "XXXXXXXXXXX";:SEARCH:SEARCH1:TRI
G:A:BUS:B2:SPI:COND SS;DAT:MOSI:VAL
"XXXXXXXX";:SEARCH:SEARCH1:TRIG:A:BUS: B2:SPI:DAT:MISO:VAL
"XXXXX XXX";:SEARCH:SEARCH1:TRIG:A:BUS:B2:SPI:DAT: SIZ
1;:SEARCH:SEARCH1:TRIG:A:BUS:B2:I2C:CO ND
2-606 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
