Tektronix MDO3000 Series - Page 740

Commands Listed in Alphabetical Order
Conditions
This command re
quires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SOFFRAMENUMber
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SOFF
RAMENUMber?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition,
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:TOKENType
Arguments
<QString> within the range 000 0000 0000 to 111 1111 1111 (000 hex to 7FF
hex).
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SO FFRAMENUMBER
“00000001000”
sets the start of frame number to 00000001000 (008 hex).
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SO FFRAMENUMBER? might
return
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SO FFRAMENUMBER
“00000001001”
, which indicates that the start of frame number is 00000001001
(009 hex).
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
This command specifies the packet ID (PID) for the special packet to be used in
a USB search: any, preamble or reserved.
SEARCH<x> is the search number,
whichisalways1,and
B<x>
Conditions
This command requires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPECIALType
{ANY|PREamble|RESERVed}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPECIALType?
2-710 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual