Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
TRIGger:A:BU
S:B<x>:RS232C:RX:DATa:SIZe
This command specifies the length of thedatastringinBytesforanRS-232
Trigger if the trigger condition is RXDATA.
B<x>
Conditions
This command requires a DPO4COMP application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3COMP application module for
MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe <NR1>
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe ?
Arguments
<NR1> is the length of the data string in bytes.
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue
This command specifies the binary data string for an RS-232 trigger if the trigger
condition involves RX.
B<x>
Conditions
This command requires a DPO4COMP application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3COMP application module for
MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALu e
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALu e?
Arguments
<Qstring> is the binary data string to be used for the trigger.
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe
This command specifies the length of the data string for an RS-232 trigger if the
trigger condition is TXDATA.
B<x>
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-855

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English