Tektronix MDO3000 Series Program Manual

Command Groups
Table 2-38: Save and Recall Commands (cont.)
Command
Description
SAVe:WAVEform:GATIng Specifies whether save waveform operations should save the entire waveform or a specified
portion of the waveform
SETUP<x>:DATE? Returns the date when the specified oscilloscope setup was saved
SETUP<x>:LABEL This command specifies the specified oscilloscope setup label
SETUP<x>:TIME ? Returns the time when the specified oscilloscope setup was saved
2-60 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English