Tektronix MSO70000/C Series User Manual

Appendix
Connecting the Probe to the Oscilloscope
Connect the probe as shown in the illustration below.
1. Insert the probe label-side up into the connector on the oscilloscope.
2. To remove the probe, squeeze the buttons on the side and pull out the probe.
MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DP O5000 Series U ser M anual 179

Tektronix MSO70000/C Series Specifications

General

Brand	Tektronix
Model	MSO70000/C Series
Category	Test Equipment
Language	English