Tektronix MSO70000/C Series User Manual

Pinpoint Trigge
rs
Trigger Type Trigger Condit
ions
CAN Trigger on CAN
Bus signals.
RS-232 Trigger on RS-232 signals (DPO7000 Series only).
I2C Trigger on In
ter-IC Control (I2C) signals: start, stop, repeated start, missing
acknowledge, address, data, and address and data.
SPI Trigger on Serial Peripheral Interface (SPI) signals.
72 MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DP O5000 Series U ser M anual

Tektronix MSO70000/C Series Specifications

General

Brand	Tektronix
Model	MSO70000/C Series
Category	Test Equipment
Language	English