Cursor setups Cursor setup c ontrol window (XY display format)
XY
These c ursor Readouts only appear when you are using XY display format. Rectangular XY readouts are
the default.
Rectangular
Shows the cursor readouts as rectangular coordinate positions. Waveform cursors display nine rectangular
readouts (ΔX, ΔY, Δt, X1, X2, Y1, Y2, t1, and t2). Screen cursors display six readouts (ΔX, ΔY, X 1,
X2, Y1, a nd Y2).
Polar
Shows the
cursor position as polar coordinate positions. Waveform cursors display nine p olar readouts (Δr,
Δ0, Δt, r1, r2, 01, 02, t1, and t2). Screen cursors display six polar readouts (Δr, Δ0, r1, r2, 01, and 02).
Product
Shows the cursor position as rectangular coordinates and the X vertical value is multiplied by the Y
vertical value. Waveform cursors display seven product readouts (ΔX×ΔY, X1×Y1, X2×Y1, X2×2, Δt, t1,
and t2). Screen cursors display three product readouts (ΔX×ΔY, X 1 ×Y 1 , a n d X 2 × Y 2 ) .
Ratio
Shows the cursor position as rectangular coordinates and the Y vertical value is divided by the X vertical
value
. Waveform cursors display six ratio readouts (ΔY÷ΔX, Y1÷X1, Y2÷Y1, Δt, t1, and t2). Screen
cursors display three ratio readouts (ΔY÷ΔX, Y1÷X1, and Y2÷Y1).
86 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series
To Next Page
Loading...
Need help?
General
