See
■
Changing the user interface language on page 15.
■
Changing the date and time on page 19.
■
Doing a functional check on page 24.
Front-panel connectors
1. Channel 1, 2, (3, 4). Channel inputs with TekVPI Versatile Probe Interface.
2. PROBE COMP. A square wave signal source and ground connection used
to compensate probes.
Output voltage: ~ 5 V at ~1 kHz
Ground reference to which to connect the probe ground lead.
See Compensating a passive voltage probe on page 28.
3. USB 2.0 Host port.
Appendices
182 TBS2000B Series Oscilloscopes User Manual
To Next Page
Loading...
