6. Push OK side-menu button to enter the password and let you disable
Measurement.
How to change the measurement password
Use this procedure to change the Measurement password. The measurement
requires a password to enable or disable the measurement function.
1. Push Utility.
2. Push -More- Page 1/2 side-menu button.
3. Push Measurement Enable side-menu button.
4. Use the Multipurpose knob to select and click Change Password. The
oscilloscope opens the Change Password entry screen.
5. Use the Multipurpose knob and side-menu buttons to select the
alphanumeric and enter characters for the current password.
6. Push OK side-menu button.
Analyzing a waveform
TBS2000B Series Oscilloscopes User Manual 101
To Next Page
Loading...
