Saving and Recalling Waveforms
3–106
TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
Figure 3–56: Save Waveform Menu (TDS 400A shown)
To Delete Waveforms
To delete a reference waveform(s) that you no longer need:
Press save/recall WAVEFORM
➞ Delete Refs (main) ➞ Delete Ref1, Delete
Ref2, Delete Ref3, Delete Ref4, or Delete All Refs
(side).
To Delete All Waveforms and Setups
To remove all stored waveforms and setups, see To Delete All Setups and
Waveforms on page 3–104.
To Display a Saved Waveform (TDS 400A Only)
To display a waveform in internal reference memory:
Press MORE
➞ Ref1, Ref2, Ref3, or Ref4 (main).
Note that in Figure 3–57, the main menu items Ref2, Ref3, and Ref4 appear
shaded while Ref1 does not. References that are empty appear shaded in the
More main menu.
To Next Page
Loading...
