File System
TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
3–45
To Copy a File or Directory
To copy a file or directory, turn the general purpose knob until it scrolls the
cursor over the name of the file to copy. Then, press the side menu Copy button.
The file menu reappears with the names of directories to copy to. Select a
directory and press the side-menu button labelled Copy <name> to Selected
Directory.
To copy all files, select the *.* entry.
The digitizing oscilloscope copies a directory and all its contents.
To Print a File or Directory
To print a file, turn the general purpose knob until it scrolls the cursor over the
name of the file to print. Then, press the side-menu Print button.
The Print-To side menu should appear. Select the port to print to from GPIB,
RS-232, or Centronics. (See Figure 3–25.) Then the digitizing oscilloscope
sends the file in its raw form out the port.
To Create a Directory
To create a new directory, press the side menu Create Directory button.
The labelling menu appears. Turn the general purpose knob or use the main-
menu arrow keys to select each letter. Press Enter Char from the main menu to
enter each letter. When you have entered the name, press the side menu OK
Accept item. (See Figure 3–25.)
To Set Confirm Delete
To turn on or off the confirm delete message, toggle the side menu Confirm
Delete button.
When the confirm delete option is OFF, the digitizing oscilloscope immediately
deletes files or directories. When the confirm option is ON, the digitizing
oscilloscope warns you before it deletes files and gives you a chance to
reconsider.
To Set Overwrite Lock
To turn on or off the file overwrite lock, toggle the side menu Overwrite Lock
button.
To Next Page
Loading...
