TDS 420A, TDS 430A, TDS 460A & TDS 510A User Manual
3–47
Hardcopy
You can get a copy of the digitizing oscilloscope display by using the hardcopy
feature. This section lists hardcopy formats and describes how to setup and
execute a hardcopy.
Supported Formats
Different hardcopy devices use different formats. The digitizing oscilloscope
supports the following formats:
H HP Thinkjet inkjet printer
H HP Deskjet inkjet printer
H HP Laserjet laser printer
H Seiko DPU 411/412 portable thermal printer
H HPGL Color Plot
H EpsonR
H InterleafR
H Tag Image File Format (TIFFR)
H PC PaintbrushR (PCXR)
H Microsoft WindowsR file format (BMPR)
H Encapsulated PostscriptR (Image, Mono Plot, and Color Plot)
Some formats, particularly Interleaf, Postscript, TIFF, PCX, BMP, and HPGL,
are compatible with various desktop publishing packages. You can paste files
created from the oscilloscope directly into a document when using any of those
desktop publishing systems.
EPS Mono and Color formats are compatible with the Tektronix Phaser Color
Printer, HPGL is compatible with the Tektronix HC100 Plotter, and Epson is
compatible with the Tektronix HC200 Printer.
To Set Up for Making Hardcopies
Before you make a hardcopy, you need to set up communications and hardcopy
parameters. This discussion assumes that the hardcopy device is already
connected to the GPIB port on the rear panel.
To Next Page
Loading...
