Tektronix TDS 420A - Page 100

Command Descriptions
2–86
TDS Family Oscilloscope Programmer Manual
CURSor:PAIred:HDELTA?
CURSor
:
PAIred :
?
HDELTA
CURSOR:PAIRED:HDELTA?
might return 5.08E+0 for the voltage difference between the two cursors.
CURSor:PAIred:HPOS1 (Query Only)
Queries the horizontal bar (voltage) position of the first paired cursor.
Cursor
CURSor:FUNCtion
CURSor:PAIred:HPOS1?
CURSor
:
PAIred :
?
HPOS1
CURSOR:PAIRED:HPOS1?
might return -64.0E-3, indicating that the first cursor is at –64.0 mV.
CURSor:PAIred:HPOS2 (Query Only)
Queries the horizontal bar (voltage) position of the second paired cursor.
Cursor
CURSor:FUNCtion
CURSor:PAIred:HPOS2?
CURSor
:
PAIred :
?
HPOS2
CURSOR:PAIRED:HPOS2?
might return -64.0E-3, indicating the second cursor is at –64.0 mV.
Syntax
Examples
Group
Related Commands
Syntax
Examples
Group
Related Commands
Syntax
Examples