Command Descriptions
2–186
TDS Family Oscilloscope Programmer Manual
specifies the reference waveform destination in which the template
waveform is to be stored.
specifies that the template waveform referred to with the LIMit:TEMPLate
STORe command is stored as the REF2 waveform.
LIMit:TEMPLate:SOUrce
Sets or queries the channel, math waveform, or reference waveform that the
LIMit:TEMPLate STORe will use.
Limit Test
LIMit:COMPARE:CH<x>, LIMit:TEMPLate, LIMit:TEMPLate:DESTination
! ! "
specifies that the template waveform is the waveform currently being
acquired using the specified channel.
specifies that the template waveform is the waveform currently stored
as the specified math waveform.
specifies that the template waveform is the waveform currently stored as
the specified reference waveform.
Arguments
Examples
Group
Related Commands
Syntax
Arguments
To Next Page
Loading...
Need help?
General
