Tektronix TDS 420A - Troubleshooting Equipment

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–215
500C and 700C) | EXTINCTRATIO (TDS 500C and 700C) | FALL |
FREQuency | HIGH | HITs (TDS 500C and 700C) | LOW | MAXimum |
MEAN | MEANDBM (TDS 500C and 700C) | MEDian (TDS 500C and 700C) |
MINImum | NDUty | NOVershoot | NWIdth | PDUty | PEAKHits (TDS
500C and 700C) | PERIod | PHAse | PK2pk | POVershoot | PWIdth |
RISe | RMS | SIGMA[1-3] (TDS 500C and 700C) | STDdev (TDS 500C
and 700C) | WAVEFORMS (TDS 500C and 700C) }
MEASUrement:IMMed:TYPe?
:MEASUrement
IMMed
:
TYPe
<Space>
POVershoot
?
HIGH
FALL
MINImum
LOW
CRMs
AMPlitude
FREQuency
AREa
DELay
PDUty
MAXimum
NDUty
NWIdth
NOVershoot
PWIdth
RMS
PERIod
PK2pk
RISe
MEAN
BURst
CARea
PHAse
CMEan
WAVEFORMS
MEDian
STDdev
SIGMA[1-3]
PEAKHits
EXTINCTPCT
EXTINCTDB
MEANDBM
EXTINCTRATIO
HITs
For more information on how measurements are derived, see Appendix B:
Algorithms, in the related TDS Family User Manual.
AMPlitude is the high value minus the low value.
Arguments