Command Descriptions
2–274
TDS Family Oscilloscope Programmer Manual
%
"
$
"
"
("'#"
%!
#%!
" corresponds to the Isolated +1 on the front panel menu. This is the
default value.
" corresponds to the Isolated –1.
%! corresponds to Eye Diagram.
selects the AMI pulseform to the Isolated +1.
TRIGger:MAIn:COMMunication:AMI:THReshold:HIGH
TDS 500C & 700C Only
Sets or queries the AMI communication trigger’s high threshold value in volts.
Trigger
%"("'#"&#
%"("'#"&#
%
"
$
("'#"
&#
is the high value of the threshold. The unit of measure is volts. The
default is +0.5 volts.
2.8 E–2
sets the high threshold to 28 milliVolts.
Arguments
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
