Tektronix TDS 420A - Page 333

Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–319
TRIGGER:MAIN:PULSE:TIMEOUT:TIME 3.134E-6
sets the timeout time to 3.134 ms.
TRIGger:MAIn:PULse:WIDth? (Query Only)
TDS 510A, 500C, 600B, & 700C Only
Returns the width parameters for the main pulse width trigger.
Trigger
TRIGger:MAIn:PULse:WIDth?
TRIGger :
:
PULse
MAIn
WIDth ?:
TRIGGER:MAIN:PULSE:WIDTH?
might return :TRIGGER:MAIN:PULSE:WIDTH:LOWLIMIT 2.0E-9;HIGHLIMIT
2.0E-9;WHEN WITHIN;POLARITY POSITIVE as the current main pulse trigger
parameters.
TRIGger:MAIn:PULse:WIDth:HIGHLimit
TDS 510A, 500C, 600B, & 700C Only
Sets or queries the upper limit for the main pulse width trigger. This is equiva-
lent to setting Upper Limit in the Pulse Width Trig When side menu.
Trigger
TRIGger:MAIn:PULse:WIDth:HIGHLimit <NR3>
TRIGger:MAIn:PULse:WIDth:HIGHLimit?
?
<Space> <NR3>
TRIGger :
:
PULse
MAIn
WIDth
:
HIGHLimit
:
<NR3> is the upper limit, in seconds.
Examples
Group
Syntax
Examples
Group
Syntax
Arguments