Tektronix TDS 420A - Page 334

Command Descriptions
2–320
TDS Family Oscilloscope Programmer Manual
TRIGger:MAIn:PULse:WIDth:LOWLimit
TDS 510A, 500C, 600B, & 700C Only
Sets or queries the lower limit for the main pulse width trigger. This is equiva-
lent to setting Lower Limit in the Pulse Width Trig When side menu.
Trigger
TRIGger:MAIn:PULse:WIDth:LOWLimit <NR3>
TRIGger:MAIn:PULse:WIDth:LOWLimit?
?
<Space> <NR3>
TRIGger :
:
PULse
MAIn
WIDth
:
LOWLimit
:
<NR3> is the lower limit, in seconds.
TRIGger:MAIn:PULse:WIDth:POLarity
TDS 510A, 500C, 600B, & 700C Only
Sets or queries the polarity for the main pulse width trigger. This is equivalent to
selecting the polarity in the Pulse Width Polarity side menu.
Trigger
TRIGger:MAIn:PULse:WIDth:POLarity { NEGAtive | POSITIVe }
TRIGger:MAIn:PULse:WIDth:POLarity?
TRIGger :
:
PULse
MAIn
WIDth :
POLarity
<Space>
?
:
POSITIVe
NEGAtive
NEGAtive specifies a negative pulse.
Group
Syntax
Arguments
Group
Syntax
Arguments