Tektronix TDS2014 Manual

TDS1000 and TDS2000 Series Digital Storage Oscilloscopes Service Manual
7-- 1
Diagrams
This section describes the electrical operation of the TDS1000- and TDS2000-
series oscilloscopes using the major circuit blocks or modules. Figure 7--1 shows
the oscilloscope module interconnections.
The shaded area in Figure 7--1 represents modules and circuits used only in
four-channel oscilloscopes.

Tektronix TDS2014 Specifications

General

Channels	4
Bandwidth	100 MHz
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Resolution	320 x 240 pixels
Display	5.7 inch color LCD
Trigger Types	Edge, Video
Interface	USB
Input Impedance	1 MΩ
Power Requirements	100 to 240 V