Getting Started
TDS3000B Serie s User Manual
1-5
Product and Feature Description
The TDS3000B Serie s Digital Phosphor Oscilloscope family consists
of the models in the table below.
Model Bandwidth
Maximum
sample rate
TDS3012B (2 Ch), TDS3014B (4 Ch) 100 MHz 1.25 GS/s
TDS3024B (4 Ch) 200 MHz 2.5 GS/s
TDS3032B (2 Ch), TDS3034B (4 Ch) 300 MHz 2.5 GS/s
TDS3044B (4 Ch) 400 MHz 5GS/s
TDS3052B (2 Ch), TDS3054B (4 Ch) 500 MHz 5GS/s
TDS3064B (4 Ch) 600 MHz 5GS/s
Acquisition Features
WaveAlertt Waveform Anomaly D etection. Automatically detects
anomalous waveforms by compari ng the current waveform to the
previous waveform. Sets how the oscilloscope responds: stop on
anomaly, beep on anomaly, and save anomalous waveform to disk.
Useful for capturing signal glitches and intermittent waveform
errors. See page 3--13.
Separate Digitizers. Ensure accurate timing measurements with
separate digitizers for each channel. Each digitizer can sample at up
to the maximum sample rate; acquisition on all channels is always
concurrent to provide full single-shot bandwidth on each channel.
To Next Page
Loading...
Need help?
General
