Tektronix WVR6020 Quick Start Manual

Installation
To Install the Instrument
1. Pull the slide
-out track section to the fully
extended position.
2. Insert the instrument chassis sections
into the slide-out sections.
3. Press the stop latches, and push the
instrument toward the rack until the
latches snap into their holes.
4. Press the stop latches again, and push
the instrument fully into the r ack.
5. Tighten the front-panel retaining screws.
Waveform Rasterizers Quick Start User Manual 5

Tektronix WVR6020 Specifications

General

Brand	Tektronix
Model	WVR6020
Category	Measuring Instruments
Language	English