Tektronix WVR6020 - Page 34

Getting Acquain
ted With Your Instrument
Analog Input/Output Connector
The Analog I/O connector is used to input and output analog signals. The Analog I/O connector is a 62-pin, D-subminiature
connector. Pin out and pin names follow.
CAUTION. Use care when connecting
the Analog Audio Output. Refer to the
instrument Specifications to ensure Audio
Load and Output Power meet specifications.
Exceeding Analog Audio Output Power may
result in damage to the instrument.
Pin Name Key
ANALOG_INPUT
_A 1 _N
ANALOG_OUTPUT
_B 2 _P
3
4
Balanced differential analog
audio input or output
Input A
Input B
Chan 1
Chan 2
Chan 3
Chan 4
N = Negative
P = Positive
Pin Pin Name Pin Pin Name
1
ANALOG_INPUT_A1_P
2
ANALOG_INPUT_B1_P
3
ANALOG_INPUT_A2_P
4
ANALOG_INPUT_B2_P
5
ANALOG_INPUT_A3_P
6
ANALOG_INPUT_B3_P
7
ANALOG_INPUT_A4_P
8
ANALOG_INPUT_B4_P
9
ANALOG_INPUT_A5_P
10
ANALOG_INPUT_B5_P
11
ANALOG_INPUT_A6_P
12
ANALOG_INPUT_B6_P
13
GND (Ground)
14
ANALOG_OUTPUT_1_P
15
ANALOG_OUTPUT_2_P
16
ANALOG_OUTPUT_3_P
17
ANALOG_OUTPUT_4_P
18
ANALOG_OUTPUT_5_P
19
ANALOG_OUTPUT_6_P
20
ANALOG_OUTPUT_7_P
21
ANALOG_OUTPUT_8_P
22
ANALOG_INPUT_A1_N
23
ANALOG_INPUT_B1_N
24
ANALOG_INPUT_A2_N
25
ANALOG_INPUT_B2_N
26
ANALOG_INPUT_A3_N
18 Waveform Rasterizers Quick Start User Manual