Linea 2K and 4K Monochrome Line Scan Camera User's Manual 45
Teledyne DALSA 03-032-20206-00
Displays the currently loaded firmware
version number. Firmware files have a
unique number and have the .cbf file
extension. (RO)
Displays the device‘s factory set cam era
serial number. (RO)
Feature to store user-programmable
identifier of up to 15 characters. The default
factory setting is the camera serial number.
(RW)
Power-up
Configuration
Selector
Selects the camera configuration set to load
and make active on camera power-up or
reset. The camera configuration sets are
stored in camera non-volatile memory.
(RW)
Load factory default feature settings
Select the user defined configuration
UserSet 1 as the Power-up Configuration.
Select the user defined configuration
UserSet 2 as the Power-up Configuration
Select the user defined configuration
UserSet 3 as the Power-up Configuration
Select the user defined configuration
UserSet 4 as the Power-up Configuration.
Select the user defined configuration
UserSet 5 as the Power-up Configuration.
Select the user defined configuration
UserSet 6 as the Power-up Configuration.
Select the user defined configuration
UserSet 7 as the Power-up Configuration.
Select the user defined configuration
UserSet 8 as the Power-up Configuration.
Selects the camera configuration set to load
feature settings from or save current feature
settings to. The Factory set contains default
camera feature settings. (RW)
Select the default camera feature settings
saved by the factory
Select the User-defined Configuration space
UserSet1 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet2 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet3 to save to or load from features
settings previously saved by the user.
To Next Page
Loading...
