Teledyne Linea - Page 46

46 Linea 2K and 4K Monochrome Line Scan Camera User's Manual
03-032-20206-00 Teledyne DALSA
Display Name
Feature
Description
Device
Version
& View
UserSet4
UserSet4
Select the User-defined Configuration space
UserSet4 to save to or load from features
settings previously saved by the user.
UserSet5
UserSet5
Select the User-defined Configuration space
UserSet5 to save to or load from features
settings previously saved by the user.
UserSet6
UserSet6
Select the User-defined Configuration space
UserSet6 to save to or load from features
settings previously saved by the user.
UserSet7
UserSet7
Select the User-defined Configuration space
UserSet7 to save to or load from features
settings previously saved by the user.
UserSet8
UserSet8
Select the User-defined Configuration space
UserSet8 to save to or load from features
settings previously saved by the user.
Power-on User Set
UserSetDefaultSelector
Allows the user to select between the
factory set and 1 to 8 user sets to be loaded
at power up
1.00
Beginner
Current User Set
UserSetSelector
Points to which user set (1-8) or factory set
that is loaded or saved when the
UserSetLoad or UserSetSave command is
used
1.00
Beginner
Load Configuration
UserSetLoad
Loads the camera configuration set
specified by the User Set Selector feature, to
the camera and makes it active. (W)
1.00
Beginner
Save Configuration
UserSetSave
Saves the current camera configuration to
the user set specified by the User Set
Selector feature. The user sets are located on
the camera in non-volatile memory. (W)
1.00
Beginner
Device Built-In Self
Test Status
deviceBISTStatus
Determine the status of the device using the
‗Built-In Self Test‘. Possible retu rn valu es
are device-specific. (RO)
1.00
DFNC
Beginner
LED Color
deviceLEDColorControl
Displays the status of the LED on the back
of the camera. (RO)
1.00
DFNC
Beginner
Temperature
DeviceTemperature
Displays the internal operating temperature
of the camera. (RO)
1.00
DFNC
Beginner
Refresh
Temperature
refreshTemperature
Press to display the current internal
operating temperature of the camera.
1.00
DFNC
Beginner
Input Voltage
deviceInputVoltage
Displays the input voltage to the camera at
the power connector (RO)
1.00
DFNC
Beginner
Refresh Voltage
refreshVoltage
Press to display the current input voltage of
the camera at the power connector
1.00
DFNC
Beginner