Teletek electronics iRIS8 - APPENDIX C - Initial Start-Up of the System

87 pages

Save Page as PDF

To Next Page

To Previous Page

iRIS8 - Addressable Fire Alarm Panel – Installer Programming

APPENDIX C - Initial Start-up of the System

Main Page

Table of Contents2
Introduction6
General Description6
Care of the TFT Screen6
Quick Review of the Panel Interface6
LED Indication for the System Status6
LED Indication for Activated Zones8
TFT Screen8
Status Icons Section8
Section for Events Review10
Functional Buttons for Programming10
Sound Signalization10
Installer Programming11
Changing the Access Level11
Installer System Menus11
General Information for Text Introducing11
General Information for Digits Introducing12
Quick Logging out from the Installer Menus12
Programming System Menus13
Zones13
Attaching Zone to Groups14
Zone Operation Mode14
Setting Time Delay T2 for Zone15
Programming of Sounder Groups15
Zones - Quick Review16
Devices16
Periphery Devices17
Current Status of Periphery Device17
Main Power Supply Unit Screen18
Input-Output Module Screen19
Loop Controller Screen19
Loop Devices - General Information Screen20
Loop Devices - Quick Review22
Loop Devices - Sensoiris Devices Settings23
Optical-Smoke Detectors23
Temperature Detectors25
Combined Detectors25
Manual Call Points27
Wall Mounted Sounders27
Wall Mounted Sounders with Strobe (VAD Devices According en 54-23)28
Bases with Sounder28
Bases with Sounder and Strobe29
Mini Module30
Input/Output Modules31
Zone Modules34
240V AC Relay Module34
MIMIC Module35
GAS Detector35
Addressing of Devices36
Set Address37
Change Address38
Start Self Addressing38
Auto-Addressing Menu39
Loop Zero Address40
Inputs40
Periphery Type Input42
Loop Type Input42
Zone Type Input43
Alarms Type Input43
Time Type Input44
Date Type Input44
Action Type Input45
General Type Input46
Network Type Input47
Zone Group Type Input47
Device Group Type Input48
Reviewing and Attaching of Inputs to Groups48
Outputs49
Periphery Type Output50
Loop Type Output50
Network Type Output51
Action Type Output51
Event Type Output52
Edit Outputs MAP - Menu for Setting Input Groups, Controlling Outputs52
Panel53
Setting Access Codes and Levels for Operation53
Network Settings55
Disable Menu58
Sounders Mode58
Phase Evacuation (Stage 1 and Stage 2)60
Setting PASO Panels (EVAC ZONE Button)61
Call Points Mode61
Language Selection62
Delay Time (T1) Setting62
Setting Printer Type62
Company Logo Setting (Screen Saver)62
FAT/FBF & ESPA444 Settings Menus63
Restore Defaults65
Save the Configuration65
Maintenance System Menus66
Setting Time66
Setting Date66
Setting Daytime Mode67
Setting Outputs Delay68
Review the Log Memory for Events69
Clear the Log Memory for Events69
Performing Tests70
Zone Walk Testing70
Indication Test71
Device Test71
Sounder Output Test71
Performing Disablements72
Zones72
Loop Devices72
Zone Devices72
Outputs73
Software Revision73
Display Calibration and Settings74
Coordinates Calibration74
Colors Review75
Setting the Screen Backlight75
View Insulator Active76
APPENDIX А - General Menu Structure77
APPENDIX B - Sensoiris Device Types79
APPENDIX C - Initial Start-Up of the System80
APPENDIX D - "Two Steps of Alarming" Operation Algorithm81
APPENDIX E - Sensoiris Sounders Consumption83
APPENDIX F - Sensoiris Sounders Sound Types84
APPENDIX G - Messages for Events85

Teletek electronics iRIS8 - APPENDIX C - Initial Start-Up of the System

Table of Contents

Other manuals for Teletek electronics iRIS8

Related product manuals