Telit Wireless Solutions ME910G1 Series User Manual

ME910G1 HW Design Guide
1VV0301593 Rev.3 Page 11 of 97 2020-03-24
2. GENERAL PRODUCT DESCRIPTION
Overview
The ME910G1 module is a CATM / NBIoT communication product which allows integrators
to plan on availability for even the longest lifecycle applications, highly recommended for
new designs specified for coverage worldwide.
The product is fully voice capable, the digital audio interfaces make it suitable for
applications such as voice enabled alarm panels, mHealth patient monitors and specialty
phones such as those for the elderly or sensory-impaired.
The ME910G1 operates with 1.8 V GPIOs, minimizing power consumption and making it
even more ideally suited for battery powered and wearable device applications.
Product Variants and Frequency Bands
Product
2G Band (MHz)
LTE CATM1
NBIoT
Region
ME910G1-W1
-
B1, B2, B3, B4,
B5, B8, B12,
B13, B18, B19,
B20, B25, B26,
B27, B28, B66,
B85
B1, B2, B3, B4,
B5, B8, B12,
B13, B18, B19,
B20, B25, B26,
B28, B66, B71,
B85
Worldwide
ME910G1-WW
850, 900, 1800,
1900
B1, B2, B3, B4,
B5, B8, B12,
B13, B18, B19,
B20, B25, B26,
B27, B28, B66,
B85
B1, B2, B3, B4,
B5, B8, B12,
B13, B18, B19,
B20, B25, B26,
B28, B66, B71,
B85
Worldwide
Refer to “RF Section” for details information about frequencies and bands.
NOTE:
Cellular technologies and frequency bands that are enabled may
vary based on firmware version and firmware configuration used.

Telit Wireless Solutions ME910G1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1 Series
Category	GSM/GPRS Modules
Language	English