Telit Wireless Solutions ME910G1 Series User Manual

ME910G1 HW Design Guide
1VV0301593 Rev.3 Page 51 of 97 2020-03-24
5.7.2. SPI
The ME910G1 Module is provided by a standard 3-wire master SPI interface + chip select
control.
The following table is listing the available signals:
PAD
Signal
I/O
Function
Type
NOTE
D15
SPI_MOSI
O
SPI MOSI
CMOS
1.8V
Shared
with
TX_AUX
E15
SPI_MISO
I
SPI MISO
CMOS
1.8V
Shared
with
RX_AUX
F15
SPI_CLK
O
SPI Clock
CMOS
1.8V
H14
SPI_CS
O
SPI Chip Select
CMOS
1.8V
NOTE:
Due to the shared functions, SPI port and TX_AUX/RX_AUX port
cannot be used simultanously.
Refer to ME910G1 series AT command reference guide for port
configuration.

Telit Wireless Solutions ME910G1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1 Series
Category	GSM/GPRS Modules
Language	English