Telit Wireless Solutions ME910G1 Series User Manual

ME910G1 HW Design Guide
1VV0301593 Rev.3 Page 60 of 97 2020-03-24
Item
Min
Typical
Max
Unit
Input Voltage range
0
-
1.8
Volt
AD conversion
-
-
10
bits
Input Resistance
1
-
-
Mohm
Input Capacitance
-
1
-
pF
The ADC could be controlled using an AT command.
The command is AT#ADC=1,2
The read value is expressed in mV
Refer to SW User Guide or AT Commands Reference Guide for the full description of this
function.

Telit Wireless Solutions ME910G1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1 Series
Category	GSM/GPRS Modules
Language	English