Telos Hx1 - 7 Specifications

| 41
7 Specications
7.0 Specications
ANALOG INPUTS
Send Analog Inputs 1 for Hx1, 2 for Hx2 (one per hybrid)
Connector XLR Female, Pin 2 High (Active Balanced, RF Suppressed)
Input Range Selectable between MIC and LINE levels
Line Input Level Adjustable from -10 to +8 dBu
Impedance Bridging > 50 K Ohms
Analog Clip Point +21 dBu
A/D Converter Resolution 24 bits
ANALOG OUTPUTS
Receive Analog Outputs 1 for Hx1, 2 for Hx2 (one per hybrid)
Connector XLR Male, Pin 3 High (Active Balanced, RF Suppressed)
Output Level Nominal +4 dBu, xed
Impedance < 50 Ohms
D/A Converter Resolution 24 bits
Headroom Before Clipping 20 dB headroom from +4 dBu nominal levels
AUDIO PERFORMANCE
Frequency Response 200 to 3400 Hz, +/- 1 dB
THD+N/Input < 0.5% THD+N using 1 KHz sine wave
Dynamic Range Analog in to Analog out, studio loop mode, 10 hz – 20 khz A-
weighted > 92 db
Signal to Noise Analog Output, referenced to a -12dbm phone line,
(producing a +4 dbu output), 10 hz-20 Khz A weighted > 72dB
AES Digital Input / Output (Optional plug-in module)
Overview Plug-in module converts the XLR inputs and outputs to AES3
(one input or output on left channel of AES stream)