Telstra 13450 - Call Screening; Number of Rings

55
To set answer on/off with a cordless handset:
Press
when idle.
Press
or to scroll to Answering sys, then press .
Press
or to scroll to Answer ON/OFF, then press .
Press
or to scroll to On or Off, then press .
To set answer on/off with the telephone base:
Press
ANS to turn the answering system on or off.
CALL SCREENING
Use this feature to choose whether incoming messages can be heard over the
cordless handset or the telephone base while they are being recorded.
To set call screening on/off with a cordless handset:
Press
when idle.
Press
or to scroll to Answering sys, then press .
Press
or to scroll to Ans sys setup, then press .
Press SELECT again to select Call screening.
Press
or to scroll to On or Off, then press .
To set call screening on/off with the telephone base:
Press
when idle, then press SELECT to select Answering system.
Press
p
q
to scroll to Ans sys setup, then press SELECT.
Press SELECT again to select Call screening.
Press
p
q
to scroll to On or Off, then press SAVE.
NUMBER OF RINGS

machine answers after two rings if you have new messages, or after four rings
when there are no new messages. This enables you to check for new messages and
avoid paying long distance charges when calling from out of your local area.
To set number of rings with a cordless handset:
Press
when idle.
Press
or to scroll to Answering sys, then press .
Press
or to scroll to Ans sys setup, then press .
Press
or to scroll to # of rings, then press .
Press or to scroll to select 6, 5, 4, 3 or 2, then press .
1.
2.
3.
4.
•
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
3.
4.
5.