30
When the Bluetooth enabled phone is successfully paired, the screen will display
“COMPLETED” with a conrmation tone and the icon appears on the handset.
REPLACE A PAIRED MOBILE PHONE
If you have already paired up a Bluetooth enabled phone, you will need to remove it if
you would like to pair up another device. Follow the below steps to replace and pair
up a new device.
Press MENU on the handset in idle mode to enter the main menu.
Press or to scroll to PAIR MOBILE.
Press SELECT and or to scroll to REPLACE.
Press SELECT and the handset screen displays “READY?”.
Press SELECT, the handset screen displays “DISCOVERING”. The Bluetooth
feature of system is activated.
Using your Bluetooth enabled mobile phone, turn on the Bluetooth feature and
search for a new device.
Once your Bluetooth enabled mobile phone has found the Telstra 13500/13550
telephone, select it and continue the pairing process.
When the Bluetooth enabled phone is successfully paired, the screen will display
“COMPLETED” with a conrmation tone.
7.
1.
2.
3.
4.
5.
6.
7.
8.
Notes:
The pairing process may take up to one minute. If the pairing process fails,
try again.
The steps for the pairing process may vary for different mobile phones. If
this happens, follow the prompts on your mobile phone and your Telstra
13500/13550 to complete the pairing process.
Refer to the User’s manual of your Bluetooth enabled mobile phone to learn
how to search for or add new Bluetooth devices.
•
•
•
To Next Page
Loading...
