Telstra 13550 - No Coverage Tone; Auto Answer

48
To set the low battery tone:
Press MENU when the handset is not in use.
Press or to scroll to HS SETTINGS.
Press SELECT and or to scroll to TONE SETUP.
Press SELECT and or to scroll to BATTERY TONE.
Press SELECT and or to select ON or OFF.
Press SELECT to save your selection. You hear a conrmation tone.
NO COVERAGE TONE
When a handset is out of range of the telephone base, an alert tone will be emitted if
no coverage tone is set to ON, You need to move the handset closer to the telephone
base.
To set no coverage tone:
Press MENU when the handset is not in use.
Press or to scroll to HS SETTINGS.
Press SELECT and or to scroll to TONE SETUP.
Press SELECT and or to scroll to OUT OF RANGE.
Press SELECT and or to select ON or OFF.
Press SELECT to save your selection. You hear a conrmation tone.
AUTO ANSwER
This feature allows you to answer a call by lifting the handset off the base if you have
set the auto answer to ON.
To reset the auto answer:
Press MENU when the handset is not in use.
Press or to scroll to HS SETTINGS.
Press SELECT and or to scroll to AUTO ANSWER.
Press SELECT and or to select ON or OFF.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.