Telstra 13550 - Intercom

37
INTERCOM
Use the intercom feature for conversations between two handsets.
Press MUTE/DELETE on your handset when not in use.
If you have only one handset, your handset displays NOT POSSIBLE.
If you have two handsets, your handset displays CALLING HS X.
If you have three or more handsets, your handset lists all registered
handsets. Press or to select a destination handset, and then press
SELECT. Your handset displays CALLING HS X.
The destination handset rings and its screen displays CALL FR HS X.
2. To answer the intercom call, press or on the destination handset. Both
handsets now display INTERCOM.
3. To end the intercom call, press or place the handset back in the telephone
base or charger.
1.
•
•
•
Notes:
You can cancel the intercom call before it is answered by pressing on the originating
handset.
If the destination handset does not answer the intercom call within 60 seconds, it is
accessing the answering system, on a call or out of range, the originating handset
displays Unable to call and returns to idle mode.
Press MUTE on the destination handset to temporarily silence the intercom ringer.
You can use four handsets on two pairs of intercom calls. For example, when
four handsets are used on two pairs of intercom calls, use the fifth handset for
an outside call.
If there is an incoming call while the originating handset displays CALLING HS X,
the intercom request will be stopped and the screen displays CALL.
•
•
•
•
•